CNC Basics 2

2016-12-23

[public] 643K views, 14.1K likes, dislikes audio only

Before you dive it: this video likely ain't for everyone.

A follow up video to the previous CNC intro. Baby steps. If they're helpful I can keep turning up the difficulty knob -- otherwise it's back to making vise handles.

Can never have enough vise handles.

engrave the nut driver dimensions on the front face
/youtube/video/J4bMAIEFCYU?t=107.71

mark off the mounting hole
/youtube/video/J4bMAIEFCYU?t=121.119

jump into fusion 360
/youtube/video/J4bMAIEFCYU?t=165.57899

select z-axis plane and an x-axis direction
/youtube/video/J4bMAIEFCYU?t=305.44

add any additional stock in the post process
/youtube/video/J4bMAIEFCYU?t=387.47

set the work up on the milling machine table
/youtube/video/J4bMAIEFCYU?t=410.23999

generate tool paths
/youtube/video/J4bMAIEFCYU?t=474.379

pick the bottom of all the holes
/youtube/video/J4bMAIEFCYU?t=509.38901

drop a little bit lower than the bottom of the stock
/youtube/video/J4bMAIEFCYU?t=542.95898

rotate the work 90 degrees
/youtube/video/J4bMAIEFCYU?t=870.94897

set up on the router
/youtube/video/J4bMAIEFCYU?t=1033.0699

cut a little bit of a nicer chamfer
/youtube/video/J4bMAIEFCYU?t=1372.7

set the work up at 90 degrees
/youtube/video/J4bMAIEFCYU?t=1385.179